01
China Suppliers Factory EAC Certified Large Capacity Vertical Centrifugal Degasser for All Fluid Weights and Viscosities
Centrifugal degassers, also known as atmospheric degassers, are highly efficient devices that remove gas from gas cutting mud by accelerating the fluid through the impeller of an immersed centrifugal pump. APLCQ300 Centrifugal Degasser | Atmospheric Degassers have many advantages, although the processing efficiency is almost the same at over 85%. Often installed after shale shakers, degassers are widely used in a variety of solids control systems and are important for recovering mud weight, stabilizing mud viscosity properties, and reducing drilling costs.
Key Benefits of APLCQ300 Degasser
Recover Mud Weight
Efficiently removes entrapped gas from gas-cut mud to successfully restore and maintain proper mud density.
Stabilize Viscosity
Ensures stable mud viscosity properties for consistent and reliable performance during drilling operations.
Reduce Drilling Costs
Optimizes drilling fluid recovery, resulting in lowered overall mud replacement and drilling costs.
How the Centrifugal Degasser Works
The APLCQ300 Centrifugal Degasser | Atmospheric Pressure Degasser accepts any fluid weight or mud viscosity and features a simple on/off switch for quick startup and shutdown. The degassing process follows these key stages:
1
At startup, drilling fluid enters the submerged impeller and rises to the elevated spray tank.
2
A circular disk, known as a splash plate, rotates and converts the fluid into a high-speed sheet.
3
This sheet then strikes the bowl wall with sufficient force to separate the gas from the fluid.
4
The degassed fluid flows downstream through the exhaust pipe.
Frequently Asked Questions
Q: What is a centrifugal degasser?
A centrifugal degasser, also known as an atmospheric degasser, is a highly efficient device designed to remove gas from gas cutting mud by accelerating the fluid through the impeller of an immersed centrifugal pump.
Q: What is the processing efficiency of the APLCQ300 Centrifugal Degasser?
The APLCQ300 Centrifugal Degasser / Atmospheric Degasser has a processing efficiency of over 85%.
Q: Where is the degasser typically installed in a solids control system?
It is often installed after the shale shakers and is widely used across a variety of solids control systems.
Q: What are the primary benefits of using this atmospheric degasser?
The degasser is important for recovering mud weight, stabilizing mud viscosity properties, and reducing overall drilling costs.
Q: Does the APLCQ300 Degasser support varying fluid weights?
Yes, the APLCQ300 Centrifugal Degasser | Atmospheric Pressure Degasser accepts any fluid weight or mud viscosity and features a simple on/off switch for quick startup and shutdown.
Q: How is gas separated from the drilling fluid in the APLCQ300?
The fluid enters a submerged impeller, rises to a spray tank, and is converted into a high-speed sheet by a rotating splash plate. This sheet strikes the bowl wall with enough force to separate the gas, allowing the degassed fluid to flow downstream through the exhaust pipe.
description2
Features of AIPU Shale Shaker
● Flexible adjustment angle
● Quick replace screen design
● Less maintenance costs due to few wear parts
● High quality raw materials and heat treatment of the entire shaker basket
● Wear and corrosion resistant Wear and corrosion resistant coatings and stainless steel fasteners
● Customer-built services can be achieved at AIPU
description2
Shale Shaker Technical Parameters
| Model | Hunter-MG3 | Hunter-MG4 | Hunter-MG5 | Hunter-Mini | Hunter-MG4V | Hunter-MG5V | Hunter-MG4D | Hunter-MG4T |
| Capacity | 120m³/h | 140m³/h | 180m³/h | 50m³/h | 120m³/h | 120m³/h | 280m³/h | 420m³/h |
| Screen Area | 2㎡ | 2.7㎡ | 3.8㎡ | 1.35㎡ | 2.7㎡ | 2.8㎡ | 5.4㎡ | 8.1㎡ |
| Screen No. | 3 | 4 | 5 | 2 | 4 | 5 | 8 | 12 |
| Motor Power | 2x1.5 | 2x1.72 | 2x1.94 | 2x0.75 | 2x1.72 | 2x1.94 | 2x2x1.72 | 3x2x1.72 |
| Deck Angel | -1 to +5° | -1 to +5° | -1 to +5° | 0° | -1 to +5° | -1 to +5° | -1 to +5° | -1 to +5° |
description2
Customer Cases
AIPU is an API Q1. API RP 13C. ISO9001. ISO14001. ISO18001. and EAC approved manufacturer. Under all AIPU people efforts our products have served users over 30 countries or regions. Our products received good feedback from our regular and new customers.
